Samsung Profile - Page 45

Voice SVC 45
6.
Continue the recording process.
After 10 sets of digits, the phone asks whether you want to
do more adaptation.
7. If you answer Yes in step 5, repeat steps 4 and 5 for
another 10 sets of digits.
After the second group of 10 sets of digits, Adaptation
complete plays through the speaker and the Digit Dialing
menu displays.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In Standby mode, press Menu ➔ Voice SVC ➔ Voice
Settings.
2. From the Voice Settings menu, select Digit Dialing ➔
Reset Digits. The phone prompts you to confirm digit
reset.
3. Press OK to reset your digit adaptation, or press Back to
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. In Standby mode, press Menu ➔ Voice SVC ➔ Voice
Settings.
2. Select Sound.
3. Select one of the following options and press or
to accept the new setting:
• Prompts : Enables or disables audio prompts.
• Digits : Enables or disables digit playback.
• Names : Enables or disables name playback.
• Name Settings : Allows you to adjust the Speed ( Faster , Slower
or Recommended ) and Volume ( Louder , Softer , or
Recommended ) for the phone’s audio name playback.
4. Press or to discard the new setting and return
to the Sound menu.
Voice Launch
To set the key or action that launches Nuance Vsuite, do the
following:
1. In Standby mode, press Menu ➔ Voice SVC ➔ Voice
Settings.
2. Select Voice Launch.
3. Select one of the following options:
• Key Only : Press and hold or to activate Vsuite for
one call.
r580.book Page 45 Thursday, October 28, 2010 12:45 PM