Picture
Option Description
Picture Options
1080 Full HD Motion Demo → Off / On ■
Samsung’s new generation PDP panels deliver stunning
Full HD motion clarity when viewing fast action sports,
movies, and games.
This function is not available in PC, Game or Media
•
Play mode.
Film Mode ■
You can optimize the picture mode for watching movies.
Off
• : Turn the Film Mode function off.
Auto1
• : Improves the picture quality for fast motion
scenes.
Auto2
• : Allows a smoother text motion on fast motion
scenes.
Film mode is supported in TV, Video,
Component(480i / 1080i) and HDMI(1080i).
Blue Only Mode → Off / On ■
This function is for AV device measurement experts.
This function displays the blue signal only by removing the
red and green signals from the video signal so as to provide
a Blue Filter effect that is used to adjust the Colour and Tint
of video equipment such as DVD players, Home Theaters,
etc.
Blue Only Mode
• is available when the picture mode is
set to Movie or Standard.
Screen Burn Protection ■
To reduce the possibility of screen burn, this unit is
equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down
(Vertical) and side to side (Horizontal). The Time setting
allows you to program the time between movement of the
picture in minutes.
Pixel Shift • : Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
Optimum condition for pixel shift
Item
TV/Ext./AV/Component/
HDMI/PC
Horizontal 0~4 2
Vertical 0~4 4
Time (minute) 1~4 min 2 min
Scrolling • : This function helps remove after images
on the screen by moving all the pixels on the PDP
according to a pattern Use this function when there
are remaining after images or symbols on the screen
especially when you displayed a still image on the
screen for a long time.
Side Grey
• : When you watch TV with the screen ratio
of 4:3, the screen is prevented from any damage by
adjusting the white balance on both extreme left and
right sides.
Dark : When you set the screen ratio to 4:3, it
darkens the left and right sides.
Light : When you set the screen ratio to 4:3, it
brightens the left and right sides.
Picture Reset
Reset Picture Mode ■ / Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is
•
performed for each picture mode.
The Pixel Shift value may differ ■
depending on the monitor size
(inches) and mode.
This function is not available in ■
the Screen Fit mode
BN68-02331D_Eng.indb 24 2009-06-09 �� 2:26:23
To Next Page
Loading...
