Samsung PS50B551T3W - Getting Started; Checking Parts; Using the Stand-Base; Assembling the Cables

5
English
Getting Started
Getting Started
Checking Parts
Owner’s Instructions
Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean Holder-Wire Cable
Screw (4ea) Cover-Bottom Holder-Ring (4ea)
Ferrite Core for
Power Cord
Ferrite Core for
Headphone
The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite ■
core and clip it around the cable near the plug.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on ■
the floor because of possible damage to the screen. Always keep
the PDP upright.
The PDP can rotate 20 degrees in right and left directions ■ .
-20° ~ 20°
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not
visible through the transparent stand.
BN68-02331D_Eng.indb 5 2009-06-09 �� 2:26:09