To connect to Home Theatre
1
Connect the HDMI IN (1, 2(DVI), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using
an HDMI cable.
2
Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the ■
Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home ■
Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theater, not the TV.
Connect only one Home Theater. ■
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions. ■
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. ■
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. ■
Anynet+ supports up to 3 devices simultaneously. ■
TV
Anynet
+
Device 1
Anynet
+
Device 2
Anynet
+
Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Home Theatre
Optical Cable
Anynet
+
Device 4
HDMI 1.3 Cable
BN68-02331D_Eng.indb 45 2009-06-09 �� 2:26:38
To Next Page
Loading...
