Preventing
the
TV
from
falling
1.
Using
the appropriate
screws,
firmly fasten a
set
of brackets to the wall.
Confirm that the
screws
are
firmly attached to the wall.
-
You
may
need
additional material
such
as
wall
anchors
depending
on
the type of wall.
2.
Using
the appropriately
sized
screws,
firmly fasten a set of brackets to
the
TV.
-
For
the
screw
specifications, refer to
"Standard
Screw"
in
the table
on
the
previous
page.
3.
Connect
the brackets fixed to the
TV
and
the brackets fixed to the wall
with a
durable,
heavy-duty string,
and
then tie the string tightly.
- Install the
TV
near
the wall
so
that
it
does
not fall backwards.
-
Connect
the string
so
that the brackets fixed to the wall
are
at the
same
height
as
or lower than the brackets fixed to the
TV.
Detach
the
Cover-terminal
stand
from
the
TV
Detach
the
Cover-Clean
Back
terminal
from
the
TV
Eng
lish -
10
To Next Page
Loading...
