Pairing
the
TV
to
the
Samsung
Smart
Remote
1>[]0
When you
turn
on
the
TV
for
the
first
time,
the
Samsung Smart Remote pairs
to the
TV
automatically.
If
the
Samsung Smart Remote does
not
pair
to
the
TV
automatically, point
it
at
the
remote control sensor
of
the
TV,
and then press
and hold
the
buttons labeled
eand
Oas
shown in
the
figure on
the
left
simultaneously for 3 seconds
or
more.
Installing
batteries
into
the
Samsung
Smart
Remote
0 0
1.
Press
the
.A.
button at
the top
rear
of
the
Samsung Smart Remote. The body
will
pop
out
slightly
from
the
body
cover.
2.
Turn
the
remote over, and then slide
the
body
of
the remote upwards
until
the
battery
compartment
is
revealed.
3. Press
the
..
and~
buttons
at
both sides
of
the
battery
compartment
to
remove
the
existing batteries.
4. Insert
two
new batteries (l.SV AAA type) into
the
battery
compartment
making sure
that
the
batteries'
polarities(+,-) are oriented correctly. When done, slide
the
body
of
the
remote
until
it
is
nearly in its original
position.
5. Turn
the
remote over, press and hold the
.A.
button
on
the
top
rear, and then slide
the
body
of
the
remote down
into place.
• Alkaline batteries are recommended
for
longer
battery
life.
English -
12
To Next Page
Loading...
