Samsung Q900R series - Listening to the TV through a Samsung Audio Device that Supports the Wi-Fi Function

- 111 -
Listening to the TV through a Samsung audio device that supports the Wi-Fi
function
For more information about how to connect and use a Samsung audio device that supports the Wi-Fi function, refer
to its user manual.
" This function may not be supported depending on the model or geographical area.
Using Samsung audio devices that support the Wi-Fi function to create a surround sound
configuration
Settings Sound Wi-Fi Speaker Surround Setup Try Now
If you've connected one or more Samsung wireless audio devices that support the Wi-Fi function to the TV, you can
create an optimal sound set up by configuring the surround effect settings. You can select any of the surround sound
configurations, with or without a sound bar.
A surround sound configuration can be used if all of the following conditions are met:
● Two or more Samsung wireless speakers of the same type must be connected to the same wireless network.
● The Samsung audio devices that supports the Wi-Fi function, must be connected to the same wireless
network as the TV.
" The surround sound configurations with a sound bar may not be supported depending on the product.
" If you activate the Screen Mirroring function while using the Samsung audio devices that supports the Wi-Fi function, the
connection is disconnected.
" Lip syncs with mismatched video and audio time codes may occur depending on the device type.