N
Nicholas MartinJul 28, 2025
How to fix Anynet+ not working on Samsung QBR Digital Signage?
- JJohn HendersonJul 28, 2025
If Anynet+ is not working on your Samsung Digital Signage, first verify that the device is Anynet+ compatible, as the system only supports these devices. Ensure the Anynet+ device's power cord and Video/Audio/HDMI cable connections are properly connected. Also, check that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you have reconnected the HDMI cable, rescan for devices or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.