65
2nd 3rd Description
Advanced Settings White Balance Adjust the colour temperature of the picture so that white objects appear brighter.
"
This function may not be supported depending on the model.
2 Point
Adjust red, green, and blue luminosity levels in two sections for precise white balance optimisation.
20 Point Settings
Controls the white balance in 20 point interval by adjusting the red, green, and blue brightness.
– 20 Point
Adjust red, green, and blue luminosity levels in twenty sections for precise white balance optimisation.
"
Some external devices may not support this function.
Gamma Adjust the mid-range brightness of the picture.
"
Gamma settings HLG, ST.2084, and BT.1886 may change depending on the input video settings. For models with the HDR+
Mode support, the Gamma settings HLG, ST.2084, and BT.1886 may change depending on the input video and HDR+ Mode
settings. If HDR+ Mode is set to Off, HLG, ST.2084, and BT.1886 settings may be available depending on the input video. To
adjust S Curve, set HDR+ Mode to Off.
HLG / ST.2084 / BT.1886 / S Curve
Adjust the HLG, ST.2084, BT.1886, S Curve levels of the picture.
"
Available functions may differ depending on the port type.
Contrast Enhancer Automatically balance the contrast to prevent excessive differences between bright and dark areas.
Black Tone Select the black level to adjust the screen depth.
Flesh Tone Adjust the flesh tone colour by increasing or decreasing red levels.
RGB Only Mode Fine-tune the saturation and tint of the red, green, and blue colour channels.
To Next Page
Loading...
Need help?
General
