EasyManua.ls Logo

Samsung QE65T - User Manual

Samsung QE65T
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • T
    Tammy ScottAug 12, 2025
    How to fix Anynet+ when it's not working on my Samsung QE65T?
    • T
      Tammy WigginsAug 12, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • K
    Katherine HolmesAug 16, 2025
    Why is my connected device not displayed on my Samsung QE65T?
    • A
      Adrian AcevedoAug 16, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • T
    tracy15Aug 19, 2025
    What to do to exit Anynet+ on Samsung QE65T?
    • S
      Sarah ElliottAug 19, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • A
    Ashley DennisAug 23, 2025
    Why is Anynet+ not working on my Samsung QE65T TV?
    • A
      Antonio LeachAug 23, 2025
      Anynet+ may not function correctly for several reasons. Ensure the device is Anynet+ compatible, the power cord is properly connected, and the Video/Audio/HDMI cables are correctly connected. Also, verify that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ might not work during the initial setup.
  • C
    Chad DouglasAug 27, 2025
    What to do if the connected device is not displayed on my Samsung QE65T TV using Anynet+?
    • D
      Daniel Mays Jr.Aug 27, 2025
      If a connected device isn't showing up, first confirm that the device supports Anynet+ functions and that the HDMI cable is properly connected. Check if Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Ensure you're using an HDMI connection, as Anynet+ requires it. Note that some HDMI cables may not fully support Anynet+ features. If a power failure or disconnection occurred, repeat the device scan.
  • M
    Matthew LeeAug 31, 2025
    How to start Anynet+ on a Samsung TV?
    • J
      jperezAug 31, 2025
      To start Anynet+, ensure the Anynet+ device is correctly connected to your Samsung TV and verify that Anynet+ (HDMI-CEC) is turned On in the System menu.
  • N
    Nicholas WilsonSep 4, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the Samsung QE65T screen?
    • L
      Laurie RileySep 4, 2025
      This message appears because you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the product has completed the Anynet+ configuration or has finished switching to Anynet+ before using the remote control.
  • N
    nicholasknoxSep 7, 2025
    How to exit Anynet+ on a Samsung QE65T?
    • D
      David SantosSep 7, 2025
      To exit Anynet+, press the SOURCE button on your Samsung TV remote control and then select a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions and Symbols

Essential safety warnings, hazard symbols, and their meanings.

Electricity and Safety

Guidelines for safe use of electrical power to prevent hazards.

Installation and Operation Guidelines

Procedures for installing, operating, and handling the product safely.

Panel Handling, Cleaning, and Storage

Instructions for safely handling the display panel and cleaning procedures.

Preparations and Components

Checking Product Components

Verifying all necessary parts are included with the product upon purchase.

Product Parts Identification

Locating and understanding the function of various physical parts of the product.

Anti-theft Lock and Ports

Securing the product with an anti-theft lock and understanding available ports.

Connecting Source Devices

Pre-connection Checks

Steps to take before connecting any external source device to the product.

Connecting PCs and External Monitors

Methods for connecting personal computers and multiple external monitors to the display.

Input Source Switching

Procedures for selecting and switching between different connected input sources.

Control Commands and Codes

Understanding Control Codes

Explanation of commands and data structures for controlling the product remotely.

Power, Volume, and Source Commands

Commands for managing power states, audio volume, and input sources.

Display and Video Wall Commands

Commands related to screen size, video wall configuration, and safety lock features.

Safety Lock and Video Wall Control

Commands for safety lock, video wall on/off, and user control.

Player Features and Content

Player Function Overview

Overview of the player application for content playback.

Remote Control During Playback

Functions of remote control buttons used during content playback.

File Formats and Scheduling

Compatible file formats and managing content playback schedules.

Setup and Configuration

Cloning Product Settings

Copying product settings to or from an external storage device.

ID Settings and Video Walls

Managing product IDs and configuring video wall layouts.

Network Status and Settings

Checking and configuring the product's network and internet connection status.

Menu Options and Customization

Picture Settings Adjustment

Optimizing display quality through brightness, contrast, colour, and advanced settings.

OnScreen Display Configuration

Adjusting menu orientation, screen protection, and display messages.

Sound Settings Customization

Selecting sound modes, adjusting audio levels, and configuring output formats.

Network Setup Procedures

Wired Network Connection

Methods for connecting the product to a wired network.

Wireless Network Connection

Methods for connecting the product to a wireless network using WPS or manual setup.

System Settings and Device Management

System Settings Overview

Adjusting accessibility features, initial setup, and touch controls.

Power, Eco, and Security Features

Managing power controls, saving energy, and implementing security measures.

External Device and Network Management

Connecting external devices, managing network access, and configuring Anynet+.

Troubleshooting Common Issues

Pre-Contacting Service Steps

Steps to take before contacting customer support for product issues.

Resolving Installation and Screen Issues

Solutions for PC connection, display, and screen problems.

Addressing Sound and Remote Control Issues

Solutions for problems related to audio output and remote control functionality.

Troubleshooting Device and Other Issues

Diagnosing and resolving issues with source devices, touch functions, and other miscellaneous problems.

Product Specifications and Appendix

General Product Specifications

Technical details including model names, panel sizes, and resolutions.

Environmental and Operating Conditions

Recommended operating temperatures, humidity, and Plug-and-Play compatibility.

Service Responsibility and Prevention

Service cost conditions, customer faults, and afterimage burn-in prevention.

Samsung QE65T Specifications

General IconGeneral
Screen Size65 inches
HDRHDR10+
Smart TVYes
Operating SystemTizen
USB Ports2
BluetoothYes
Wi-FiYes
Voice AssistantsBixby, Alexa, Google Assistant
Resolution3840 x 2160 (4K UHD)

Related product manuals