EasyManua.ls Logo

Samsung QE55T - User Manual

Samsung QE55T
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • T
    Tamara RiveraAug 12, 2025
    How to fix Anynet+ when it's not working on my Samsung QE55T?
    • R
      Robert JamesAug 12, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • J
    jgarciaAug 16, 2025
    Why is my connected device not displayed on my Samsung QE55T TV?
    • S
      Scott AndradeAug 16, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • M
    Michael MoranAug 20, 2025
    What to do to exit Anynet+ on Samsung QE55T TV?
    • Q
      qrobertsAug 20, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • J
    Jeremy WigginsAug 23, 2025
    Why is Anynet+ not working on my Samsung QE55T TV?
    • B
      Brenda NavarroAug 23, 2025
      Anynet+ may not function correctly for several reasons. Ensure the device is Anynet+ compatible, the power cord is properly connected, and the Video/Audio/HDMI cables are correctly connected. Also, verify that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ might not work during the initial setup.
  • H
    Hannah SchultzAug 27, 2025
    What to do if the connected device is not displayed on my Samsung TV using Anynet+?
    • A
      Andrea RomeroAug 27, 2025
      If a connected device isn't showing up, first confirm that the device supports Anynet+ functions and that the HDMI cable is properly connected. Check if Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Ensure you're using an HDMI connection, as Anynet+ requires it. Note that some HDMI cables may not fully support Anynet+ features. If a power failure or disconnection occurred, repeat the device scan.
  • A
    Ashley CastilloAug 31, 2025
    How to start Anynet+ on a Samsung QE55T?
    • J
      jwilliamsAug 31, 2025
      To start Anynet+, ensure the Anynet+ device is correctly connected to your Samsung TV and verify that Anynet+ (HDMI-CEC) is turned On in the System menu.
  • D
    David KennedySep 4, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the Samsung QE55T screen?
    • R
      Robert TaylorSep 4, 2025
      This message appears because you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the product has completed the Anynet+ configuration or has finished switching to Anynet+ before using the remote control.
  • J
    Jesus JamesSep 8, 2025
    How to exit Anynet+ on a Samsung QE55T TV?
    • M
      Michael HillSep 8, 2025
      To exit Anynet+, press the SOURCE button on your Samsung TV remote control and then select a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions

General safety instructions to ensure personal safety and prevent property damage.

Electricity and Safety

Guidelines for safe handling of electrical components and connections.

Installation

Instructions and warnings related to product installation and placement.

Operation

Critical warnings for operating the product safely and correctly.

Preparations

Checking the Components

Ports

Details the various ports available on the product and their functions.

Control menu

Remote Control

Identifies and describes the functions of each button on the remote control.

Connecting and Using a Source Device

Connecting to a PC

Guide on how to connect a personal computer to the display device.

Connection Using an DP Cable

Connection Using a DVI Cable (Digital type)

Connection Using an HDMI-DVI Cable

Connecting an External Monitor

Explains how to connect external monitors for daisy-chaining.

Connecting to a Video Device

Guide on connecting various video devices to the display.

Changing the Input source

How to select and manage different input sources connected to the display.

Multiple Display Control

Cable Connection

Details on connecting cables for RS232C communication.

LAN Cable

Direct LAN cable (PC to HUB)

Cross LAN cable (PC to LFD)

Connection

Describes different methods for connecting multiple monitors.

Control Codes

Power control

Explains how to control product power status (on/off) using a PC.

Input source control

Details on how to change the input source of the product via a PC.

Screen size control

Video Wall Mode Control

Instructions to activate or deactivate Video Wall mode via a PC.

Video Wall On

How to turn the Video Wall function on or off via a PC.

Video Wall User Control

Using MDC

MDC Programme Installation;Uninstallation

Steps for installing and uninstalling the MDC program.

Player feature

Player

Overview of the player function for content playback.

File Formats Compatible with Player

Video codecs

Lists supported video codecs, containers, resolutions, and bit rates.

Video Wall

Network Status

Menu

Picture

Adjusts various picture quality settings for optimal viewing.

Advanced Settings

Configure advanced picture settings like white balance, gamma, and contrast.

Sound

Adjusts audio settings including sound mode and output.

Network

Manages network connection status and settings.

Network Settings (Wired)

Instructions for connecting the product to a network using a wired LAN cable.

Network Settings (Wireless)

Server Network Settings

System

Power Control

Troubleshooting for Anynet+

Support

Software Update

Troubleshooting Guide

Requirements Before Contacting Samsung Customer Service Centre

Steps to test the product before requesting service.

Testing the Product

Instructions for performing a product test function to check normal operation.

Check the followings.

Lists common installation and screen issues and their potential solutions.

Screen issue

Further troubleshooting for screen issues like freezing, black bars, and incorrect display.

Sound issue (For models with built-in speakers)

Troubleshooting for sound issues when video is available but no sound, or static.

Remote control issue

Solutions for problems where the remote control is not functioning.

Specifications

General

Preset Timing Modes

Appendix

Prevention of Afterimage Burn-in

Samsung QE55T Specifications

General IconGeneral
Screen Size55 inches
Resolution3840 x 2160 (4K UHD)
HDR SupportHDR10+
Smart TVYes
Operating SystemTizen
Refresh Rate60 Hz
USB Ports2
BluetoothYes
Wi-FiYes

Related product manuals