EasyManua.ls Logo

Samsung QE50T - User Manual

Samsung QE50T
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • B
    Brett PowellAug 12, 2025
    How to fix Anynet+ when it's not working on my Samsung QE50T TV?
    • M
      Melissa BaileyAug 12, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • J
    Jacob ShafferAug 15, 2025
    Why is my connected device not displayed on my Samsung QE50T?
    • P
      Peter RobertsAug 16, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • K
    Kevin MitchellAug 19, 2025
    What to do to exit Anynet+ on Samsung QE50T?
    • T
      Taylor RogersAug 19, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • J
    James HuberAug 23, 2025
    Why is Anynet+ not working on my Samsung QE50T TV?
    • M
      Madison WilliamsAug 23, 2025
      Anynet+ may not function correctly for several reasons. Ensure the device is Anynet+ compatible, the power cord is properly connected, and the Video/Audio/HDMI cables are correctly connected. Also, verify that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ might not work during the initial setup.
  • N
    Nicholas SchmidtAug 27, 2025
    What to do if the connected device is not displayed on my Samsung QE50T TV using Anynet+?
    • Z
      zcastroAug 27, 2025
      If a connected device isn't showing up, first confirm that the device supports Anynet+ functions and that the HDMI cable is properly connected. Check if Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Ensure you're using an HDMI connection, as Anynet+ requires it. Note that some HDMI cables may not fully support Anynet+ features. If a power failure or disconnection occurred, repeat the device scan.
  • S
    Susan GrahamAug 30, 2025
    How to start Anynet+ on a Samsung QE50T?
    • A
      Anthony CunninghamAug 31, 2025
      To start Anynet+, ensure the Anynet+ device is correctly connected to your Samsung TV and verify that Anynet+ (HDMI-CEC) is turned On in the System menu.
  • S
    samanthagonzalezSep 3, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the Samsung QE50T TV screen?
    • M
      mbellSep 3, 2025
      This message appears because you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the product has completed the Anynet+ configuration or has finished switching to Anynet+ before using the remote control.
  • M
    Michael TorresSep 7, 2025
    How to exit Anynet+ on a Samsung QE50T?
    • C
      chungdaleSep 7, 2025
      To exit Anynet+, press the SOURCE button on your Samsung TV remote control and then select a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions and Symbols

General safety instructions, warnings, and an explanation of safety symbols used.

Electricity and Safety Guidelines

Provides crucial information on safe electrical handling and connections to prevent hazards.

Product Installation Procedures

Details safe installation practices, including ventilation, placement, and handling precautions.

Safe Product Operation

Outlines essential safety measures and precautions to follow during product operation.

Panel Handling Precautions

Specific instructions on how to handle the product panel to prevent damage and ensure safety.

Cleaning and Maintenance

Guides on proper cleaning methods for the product's exterior and display, plus general maintenance.

Preparations

Checking Product Components

Lists and illustrates the components included with the product for initial setup.

Identifying Product Parts

Identifies and describes the external parts of specific Samsung display models.

Anti-theft Lock Installation

Explains how to use an anti-theft lock to secure the product in public places.

Port Descriptions

Details the various ports available on specific Samsung display models and their functions.

Using the Control Menu

Explains how to access and use the product's on-product control menu for basic functions.

Remote Control Operation

Provides a guide to the remote control buttons and their functions for operating the product.

Installation Guidelines Overview

Provides guidance for installing the product, including tilting, ventilation, and wall mount specifications.

Connecting and Using a Source Device

Pre-Connection Steps

Steps to take before connecting a source device, including checking ports and cables.

Connecting to a PC

Instructions on connecting a Personal Computer to the display using various cable types.

DisplayPort Cable Connection

Details on connecting a display using a DisplayPort cable, including precautions.

DVI Cable Connection

Instructions for connecting using a DVI cable, including digital type and DVI-HDMI adapter use.

HDMI-DVI Cable Connection

Guide for connecting with an HDMI-DVI cable, including audio and system settings.

External Monitor Daisy Chaining

Instructions on connecting multiple external monitors using the daisy chain feature.

Connecting Video Devices

Guidance on connecting various video devices using HDMI or DVI cables, including setup.

Audio System Connection

Instructions for connecting the product to an external audio system.

LAN Cable Connection

Steps for connecting the product to a network using a LAN cable.

Changing Input Source

How to select and change the active input source for the display.

Web Browser Usage

Instructions on using the built-in web browser, including settings and advanced features.

Samsung Workspace and Remote Workspace

Information on using Samsung Workspace and Remote Workspace for remote access.

Multiple Display Control

RS232 C Cable Connection

Details on RS232C cable interface, pin assignments, and specifications for control.

LAN Cable Pin Assignment

Information on LAN cable pin assignments and standard colours for network connectivity.

Direct and Cross LAN Cable Connections

Explains direct and cross LAN cable connections for PC to HUB and PC to LFD setups.

Multi-Monitor Connection Methods

Illustrates different methods for connecting multiple monitors using RS232C and LAN connections.

Control Codes Overview

Provides an overview of control codes for viewing and controlling the product via serial commands.

Power Control Commands

Details on commands for controlling power state (on/off) and volume via PC.

Input Source Control Commands

Explains commands for viewing and setting the product's input source.

Screen Size and Video Wall Mode Control

Instructions on controlling screen size and video wall mode via PC commands.

Safety Lock and Video Wall Control

Details on commands for enabling/disabling safety lock and controlling video wall on/off.

Video Wall User Control Commands

Commands for controlling Video Wall user settings, including divider codes.

Video Wall Divider Code Tables

Tables specifying video wall divider codes for different configurations.

Player Feature

Player Functionality Overview

Introduction to the Player feature for playing content like channels, templates, and files.

Viewing Content from Storage

Steps to select and play content from internal memory or USB devices.

Remote Control During Playback

Explains remote control buttons used during content playback for navigation and settings.

Available Playback Menus

Describes menus accessible via the TOOLS button during content playback for settings.

Supported File Formats and Codecs

Lists compatible file systems, video/audio codecs, and file versions supported by the Player.

Network Schedule and Template Files

Details restrictions for network schedule multiframe and template files (.LFD).

Video Codecs Compatibility

A comprehensive table detailing supported video and audio codecs, containers, resolution, and bit rates.

Other Content Restrictions

Lists other restrictions related to codecs, video playback, and device compatibility.

Schedule Management

How to check, save, create, edit, delete, and view schedules for content playback.

Clone Product Settings

Procedure for exporting and importing product settings to/from an external storage device.

ID Settings and PC Connection

Assigning device IDs and selecting PC connection cable types for MDC communication.

Video Wall Setup and Configuration

Instructions on customizing multiple displays to form a video wall and splitting the display.

Screen Position and Format Options

How to rearrange video wall screens and select display formats (Full, Natural).

Network Status and Timers

Checking network status and configuring On/Off timers and holiday management.

Ticker and URL Launcher Features

Using the Ticker feature for scrolling text and configuring the URL Launcher.

Menu Settings

Picture Settings Adjustment

Options for adjusting picture quality, including backlight, brightness, contrast, and sharpness.

Colour Temperature and Advanced Settings

Adjusting colour temperature, Picture Enhancer, HDR modes, Colour, and Tint settings.

White Balance and Gamma Settings

Fine-tuning white balance and gamma for optimal picture brightness and colour.

Contrast and Colour Settings

Using Contrast Enhancer, Black Tone, Flesh Tone, and RGB Only Mode for picture optimization.

Colour Space and Input Signal Plus

Configuring colour space and expanding input signal range for HDMI connections.

Motion Lighting and Picture Options

Adjusting motion lighting for power saving and picture options like colour tone and clean view.

Backlight and Picture Size Settings

Controlling local/dynamic backlight and adjusting picture size, fit to screen, and zoom.

OnScreen Display and Screen Protection

Customizing screen orientation, aspect ratio, and screen protection features like pixel shift.

Message Display and Language Settings

Configuring display of source info, no signal messages, MDC messages, and setting menu language.

Sound Mode and Equaliser Settings

Selecting sound modes, adjusting balance, and using the equaliser for audio customization.

HDMI Sound and Digital Output

Selecting HDMI sound sources and digital audio output formats.

Sound Output and Auto Volume

Selecting speaker output and automatically adjusting volume levels for consistent audio.

Network Status and Settings

Checking current network and internet status, and configuring network settings.

Wired and Wireless Network Setup

Instructions for connecting to wired and wireless networks, including automatic and manual setups.

System Settings Overview

Adjusting accessibility options, start setup, touch controls, time, and power control.

Eco Solution and Temperature Control

Managing energy saving features, screen lamp schedules, and product temperature.

External Device and Security Settings

Managing external devices, security features like PIN, safety lock, and connection locks.

Anynet+ (HDMI-CEC) Functionality

Enabling and using Anynet+ to control connected Samsung devices with the remote control.

Troubleshooting Guide

Pre-Contacting Support Steps

Steps to test the product before contacting customer support to diagnose issues.

Installation and Screen Issue Troubleshooting

Solutions for installation issues and common screen problems like no power, signal, or distortion.

Advanced Screen Issue Resolution

Resolving screen problems such as instability, ghost images, inconsistent colours, and no image.

Sound and Remote Control Troubleshooting

Steps to resolve sound issues, remote control malfunctions, and connection problems.

Source Device and Touch Function Issues

Troubleshooting issues related to source devices, touch functionality, and miscellaneous problems.

HDMI and DisplayPort Specific Issues

Troubleshooting HDMI-CEC issues, sound problems in HDMI mode, and DisplayPort settings.

Specifications

General Model Specifications

Details panel size, display area, and optimum/maximum resolutions for various Samsung display models.

Power Supply and Environmental Considerations

Information on power supply requirements, operating, and storage environmental conditions.

Plug-and-Play and Preset Timing Modes

Details on Plug-and-Play compatibility and preset signal modes for PC connection.

Preset Timing Modes Table

A table of preset signal modes for PC connection, including resolution and port compatibility.

Appendix

Responsibility for Paid Service

Conditions under which service visits may incur charges, even if within warranty.

Non-Defect and Customer-Caused Damage

Cases not considered product defects or damage caused by customer mishandling.

Afterimage Burn-in Prevention

Information on what afterimage burn-in is and recommended practices to prevent it.

Licence Information

Details on Dolby Laboratories, HDMI licensing, and HEVC content usage terms.

Samsung QE50T Specifications

General IconGeneral
BrandSamsung
ModelQE50T
CategoryTV
LanguageEnglish

Related product manuals