EasyManua.ls Logo

Samsung QE43T - User Manual

Samsung QE43T
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • J
    John RiveraAug 12, 2025
    How to fix Anynet+ when it's not working on my Samsung QE43T?
    • K
      Kelly BellAug 12, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • T
    Tina AveryAug 16, 2025
    Why is my connected device not displayed on my Samsung QE43T?
    • A
      Amy WellsAug 16, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • M
    Mitchell HernandezAug 19, 2025
    What to do to exit Anynet+ on Samsung TV?
    • T
      Todd ThomasAug 19, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • S
    Steve RiddleAug 23, 2025
    Why is Anynet+ not working on my Samsung QE43T?
    • J
      jose40Aug 23, 2025
      Anynet+ may not function correctly for several reasons. Ensure the device is Anynet+ compatible, the power cord is properly connected, and the Video/Audio/HDMI cables are correctly connected. Also, verify that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ might not work during the initial setup.
  • A
    Andrew MurphyAug 27, 2025
    What to do if the connected device is not displayed on my Samsung QE43T TV using Anynet+?
    • D
      Debra MurphyAug 27, 2025
      If a connected device isn't showing up, first confirm that the device supports Anynet+ functions and that the HDMI cable is properly connected. Check if Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Ensure you're using an HDMI connection, as Anynet+ requires it. Note that some HDMI cables may not fully support Anynet+ features. If a power failure or disconnection occurred, repeat the device scan.
  • A
    amandawattsAug 31, 2025
    How to start Anynet+ on a Samsung QE43T?
    • J
      josephhuynhAug 31, 2025
      To start Anynet+, ensure the Anynet+ device is correctly connected to your Samsung TV and verify that Anynet+ (HDMI-CEC) is turned On in the System menu.
  • V
    Veronica OchoaSep 4, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the Samsung QE43T TV screen?
    • J
      Jennifer ArnoldSep 4, 2025
      This message appears because you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the product has completed the Anynet+ configuration or has finished switching to Anynet+ before using the remote control.
  • J
    Joseph LaneSep 7, 2025
    How to exit Anynet+ on a Samsung QE43T?
    • S
      Scott GutierrezSep 7, 2025
      To exit Anynet+, press the SOURCE button on your Samsung TV remote control and then select a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions

Essential safety guidelines to prevent injury and property damage during product use.

Electricity and Safety

Guidelines for safe electrical connection, handling power plugs, and preventing shocks.

Installation Guide

Instructions for product installation, including wall mounting and ventilation.

Operation Precautions

Connecting and Using a Source Device

Before Connecting Checklist

Crucial steps and checks before connecting any external source devices.

PC Connection Guide

Step-by-step instructions for connecting a PC via HDMI, DP, or DVI cables.

Video Device Connectivity

Audio and LAN Cable Connections

Multiple Display Control

RS232 C and LAN Cable Specifications

Control Command Codes

Reference for commands and codes used to control product functions via serial communication.

Menu Settings

Picture Settings and Adjustments

Comprehensive guide to adjusting picture quality, including advanced options.

Sound Settings and Output

Network Configuration

Troubleshooting Guide

Pre-Service Product Testing

Recommended steps to diagnose issues before contacting customer support.

PC Connection Troubleshooting

Screen Display Troubleshooting

Guidance for resolving issues related to screen image quality and stability.

Sound and Remote Control Issues

Troubleshooting steps for audio problems and remote control malfunctions.

Samsung QE43T Specifications

General IconGeneral
Screen Size43 inches
Resolution3840 x 2160 (4K UHD)
HDMI Ports3
USB Ports2
Refresh Rate60 Hz
BluetoothYes
Smart TVYes
HDRHDR10+
Wi-FiYes

Related product manuals