Samsung QN43Q6DR - 03 Initial Setup; Using the TV Controller

03 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup . Follow the instructi ons displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
• To perform initialization using the SmartThings app, you must connect your mob i le device via Wi-Fi.
• If the pop-up for setup does not appear automatically on the SmartThings app on your mobile device, continue
setup manually after adding the TV using Add Device on the dashboard of the SmartThings app .
• The Smart Things app is available for mobile devices running Android 6.0 or higheror iOS 10 or higher.
• Noise may occurtemporarily when the TV communicates with mobile devices.
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached . Please
remove the protective film.
@0000@
English - 12
Control menu
@: PowerOff
(~) Ch annel Up
(~) Channe l Down
TV Controller button / Remote control sensor
~ Press : Move
lt] Press & Hold: Select
0 :vo lumeUp
8: Volume Down
@: Source
The TV Controller button is located on the bottom of the TV.