3-6
3. Disassembly and Reassembly
- This document cannot be used without the authorization of Samsung-
Part
Name
Figure Description
Main
System
23. Disassemble MAIN PCB.
1) Lift up upper right-hand side first
2) Be careful with lower middle ports.
3) Disassemble with carefully for Express button
in lower left-hand side.
24. Disassemble Touchpad LED board.
25. Remove the bluetooth module,the USB
board and the SIO board.
26. Separate the top Memory of MAIN PCB
Bottom side,then separate the second one with
the same method.
(1st, push side pin toward to each outside
direction, 2nd, Memory module lift up
automatically, 3rd, pick memory and pull out.)
1
2
3
To Next Page
Loading...
