4-8
BEh Clear screen
(
optional)
BFh Check virus and backup reminders
C0h Try to boot with INT
19
C1h Initialize POST Error Manager
(
PEM)
C2h Initialize error logging
C3h Initialize error display function
C4h Initialize system error handler
C5h PnPnd dual CMOS
(
optional)
(3)
Use of Debug card
-.
Like upper picture, debug card is connected to DEBUG connector(as following) in Main board.
-.
Debug code is shown at the viewer in red line.
-
This Document can not be used without Samsung's authorization
-
4.
Troubleshooting
To Next Page
Loading...
