Samsung RB194 Series - Fridge Door Removal Steps; Swing-Type Freezer Door Removal

12_ Setting Up
4. Remove the screw that holds
the ground wire.
5. Separate Hinge from electric
wire and ground wire as
shown above.
6. Remove the fridge door by
lifting it upward.
Be careful not to drop and
scratch the fridge door.
1. Separate the Cap on the
Middle Hinge.
2. After removing one screw and two bolts, remove the Middle Hinge.
(Unscrew the screws with the screwdriver(+) and hex bolts with the
4.75mm hex wrench.)
Removal of the freezer door (SWING TYPE - RB214,RB194)
Setting up your Refrigerator
Middle Hinge
Removal of the fridge door
1. After removing the screw,
remove the upper Hinge
Cover.
2. Disconnect electric wire on the
top of the refrigerator.
3. With the 10mm wrench,
remove the three bolts that
hold the hinge on the top of
the refrigerator.
Hinge Cover
Be careful not to drop and scratch the fridge door while removing the fridge door!
ground wire
WARNING