Setting Up _13
1. Separate the Cap on the
Middle Hinge.
2. After removing one screw and two hex bolts, remove the Middle
Hinges. (Unscrew the two hex bolts with the 4.75mm hex wrench.)
Removal of the freezer door (DRAWER TYPE - RB216,RB196)
3. After opening the Freezer
door, remove the drawer box.
4. With the 10mm wrench, remove two bolts connecting the rail
with the door.
01 SETTING UP
3. Remove the Middle Hinge
connected to the Freezer.
4. Remove the Freezer door by
lifting it upward.
Be careful not to drop and
scratch the Freezer door
5. Remove the Cap on the
Bottom Hinge.
Middle Hinge
To Next Page
Loading...
