25
Drain pipe and drain hose installation
1
Insert the flexible hose to the drain hose port.
2
Install the drain hose so that its length can be as short as
possible.
Internal diameter of the drain hose should be the same or
slightly bigger than the external diameter of the drain hose
port.
3
Wrap the drain hose with the insulation drain as shown in
figure and secure it.
Fix the flexible hose to the indoor unit with the
supplied cable clamp securely.
(Use the screwdriver to fix the flexible hose
securely.)
Note
Inner diameter of the drain hose
Give a slightly slant to the drain hose for proper
drainage of condensate.
Fix the flexible hose to the PVC with the
supplied cable tie securely.
Note
32mm(Inner diameter)
Insulation drain hose
Insulation cover drain
Cable-tie
Clamp
Flexible hose
CAUTION
Must fit tightly against
body without any gap.
To Next Page
Loading...