To Next PageTo Next Page
Need help?Do you have a question about the Samsung RE-1300 and is the answer not in the manual?
Safety precautions for servicing microwave ovens.
Precautions to avoid exposure to microwave energy during servicing.
Ensure the microwave oven is properly grounded before servicing.
Caution regarding residual charge in the high voltage capacitor.
Always unplug the oven before replacing parts.
Procedure for replacing a blown fuse due to interlock switch issues.
Prevent foreign material insertion to avoid microwave leakage.
Post-repair checks for screws, connections, and leakage.
Describes the initial circuit state when the oven is ready.
Process of setting cooking parameters via touch control.
Describes the circuit operation upon pressing START.
Circuit behavior when the door is opened mid-cooking.
Circuit behavior upon pressing the CANCEL pad.
Procedure to test the continuity of the high voltage transformer.
Procedure to test the continuity of the low voltage transformer.
Procedure to test magnetron continuity and shorts.
Procedure to check the high voltage capacitor's continuity.
Procedure to check the high voltage diode's resistance.
Procedure to check main and power control relays.
Steps for adjusting interlock and sensing switches.
Procedure to measure magnetron output power using water test.
Method to check heat distribution evenness in the oven cavity.
Lists required equipment for leakage measurement.
Step-by-step guide for measuring microwave leakage.
Leakage check procedure with the outer panel off.
Important notes and warnings for leakage measurements.
Guidelines for recording and reporting leakage test results.
Requirement for annual calibration of survey meters.
Identifies common issues not due to component failure.
General| Brand | Samsung |
|---|---|
| Model | RE-1300 |
| Category | Microwave Oven |
| Language | English |
