Samsung RF217AB - Making Minor Adjustments Between Doors; Adjusting Door Height and Fastener Installation

S tt up yourFror DoorRefr erator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
1. Pull out the freezer drawer (1), then you can see the middle hinge (2).
2. Insert the supplied hex wrench ( 3 ) into the shaft (4) of the middle hinge.
3. Please adjust the height by turning the hex wrench (3) clockwise ( ) or counter-clockwise ( ).
®
o,....
When you turn the hex wrench counter-clockwise( ), the door will move up.
1. After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap between
the hinge-grommet ( 7 ) and the middle hinge ( 8 ). The number of fasteners you'll need to insert
depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04".
16 sett]g up