S_ettJngJ_JpS_c£_£E__e,_ZzDz_s__:__e_p_zat'" - " _'-
ASSEMBLE THE FREEZER DRAWER
1, Pull out the rails to the full length on each side of the cabinet evenly,
2_ Hang the freezer door front onto open slots on the sides.
3 Tighten four 10mm hex-head screws completely..
4. VViththe drawer pulled out fully, insert the lower basket (1_) into
the rail system.
5. Hook the ends of the tilting pocket ([Z}) into both brackets ([_),
and push down until they lock into place.
12 Setting Up
To Next Page
Loading...
