Samsung RF265AB - Reattaching Refrigerator Doors

REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
t Reattach two flat head screws(_) and two hex head
screws((_) to the hinge completely.
@
@
2 Place the hole in the bottom of the door((_)over the lower
hinge ((_)
(_Be aware not to miss the hinge cap because can
it
be easily taken off,
3, Insert the upper hinge shaft(_) into the hoseon the
corner of the Refrigerator door(_), Make sure the hinge
is level between the upper hinge hole((_) and the hole of
the cabinet((_) and reattach the hinge screws(_) and
ground screw((_) by turning in a clockwise direction_
Reconnect the wires,
®
4,,Place the front edge of the top table(@) on the front of the
upper hinge(@) and reattach with three screws,
_} When reattaching the top table, sure
make that the
wires are not pressed or damaged by the top table,
Setling Up 11