REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
To remove - Pullthe brackets([_) upward untilyou hear a
clicking sound and remove the pocket
To replace- Hook tile ends of the pocket into both brackets
((_]) and push down until it locks into place,
l
o
I'o
0
"o
m
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension
Tilt up rear of drawer and lift straight out
To relocate - Place the drawer onto the rails by tilting it up,
Lower the drawer into place until it is horizontal
and slidethe drawer in,
3. Freezer Drawer Bin
To remove the drawer - Pullthe drawer out fully.
Tilt up the rear of the bin and lift it
out to remove
To replacethe drawer - Piacethe bin into the rail assembly.
To remove the divider - Pull the divider straight up,
To replacethe divider - Hook the top corners of divider over
the hole of the bin.
Operating 27