&ek-t[. gp y" Ece Jt .D_ r Re£Jg_etoot
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even, Ifyou need help, review the
previous section on leveling the Refrigerator°
When the left
door is lower
than the right
door..
'ii_Jdjustment
pad
When the left
door is higher
than the right
door
1, If you open the drawer (1_}), you can see the lower hinge ((_),
2. Insert the supplied Allen Wrench(3/16") (J_}) into the shaft ((_) of the lower hinge,
3, Please adjust the height by turning the Allen Wrench(3/16") (_) cloclewise(_::::_}or
counter-clockwise(_:=sr:z),
®
®
when you turn the Allen Wrench(3/16") counter_clockwise(_=¢7), the door will move up
1,,After adjusting the doors, please insert the supplied fastener-ring ((_) using a pair of pliers (_) in the
gap between the hinge-grommet (_) and the lower hinge((_) The number of fastener-rings you'll need
to insert depends on the gap,
O
Two fastener-rings are enclosed with the refrigerator
Thickness of each fastener-ring is 004 inch,
14 Setting Up
To Next Page
Loading...
