MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
|
Adju,_
)
Adjustment
part
|
When the left
door is higher
than the right
door.
1. If you open the drawer ({_), you can see the lower hinge (_}).
2. Insert the supplied Allen Wrench(3/16") (13_})into the shaft ((_) of the lower hinge.
3. Please adjust the height by turning the Allen Wrench(5mm) (13_})clockwise( ) or
counter-clockwise( ).
_when you turn the Allen Wrench(5mm) counter-clockwise( ), the door will move up.
®
1. After adjusting the doors, please insert the supplied fastener-ring (lID) using a pair of pliers (_[}) in the
gap between the hinge-grommet (_}) and the lower hinge(I]_}). The number of fastener-rings you'll need
to insert depends on the gap.
_Two fastener-rings are refrigerator,
enclosed
with
the
Thickness of each fastener-ring is 0.04 inch.
14 Sett]g Up
To Next Page
Loading...
