14_ Setting Up
ASSEMBLE THE FREEZER DRAWER
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (
6
) into
the rail system.
5. Hook the ends of the tilting pocket (
7
) into both brackets (
8
),
and push down until they lock into place.
Setting up your French Door Refrigerator
1. Pull out the rails to the full length on each side of the cabinet evenly.
7
8
To Next Page
Loading...
