Samsung RF268ABWP/XAA - Freezer Drawer Assembly

DISASSEMBLE THE FREEZER DRAWER
1. Take out the upper drawer by lifting it up.
\\\
\
2. Remove the tilting pocket ( 1 ) by pulling both support
guards ( 2 ) upward at the same time.
3. Take out the lower basket( 3 ) by lifting the basket up
from the rail system.
4. Remove 4 hex head bolts from both sides with a
socket wrench(lOmm).
5. Lift up the freezer door from the rails.
Sett]g up 11