ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part
Freezer Drawer
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw( 3 ) with a Phillips screwdriver(+).
%
3. Find the best level to align the door slope.
Example)Theslope is about 0.08inch(2mm)asshown below.
- Rotatethe heightadjusterto -2.0to reducethe door slope.
RefeplnCe_m==a_ _
After adjustment, tighten the controller screw ( 3 ) and then philips screws.
Settin9 up 17