2. Disconnect two connectors ([_}) at each
side of the top cap, the one connector
([_) on right side door and the other
connector (@) on left side door. Remove
the tube (_) with pressing the dark gray
color part ((_) of the water line coupler.
Z_ If a red clip is on the coupler, it must
....... be removed before removing the tube.
1
Remove the 3 hex head bolts ((_) attached to the upper
left and right door hinges with a wrench(10mm).
With a Philips head screwdriver, remove the ground
screw ([_) attached to the upper left and right door
hinges.
Remove the upper left and right door hinges ([_).
%
4. Lift the door straight up to remove.
1
With a Philips head screwdriver, remove the screw ([_)
attached to the lower left and right door hinges.
With a wrench(3/16"), remove the two hex head bolts (_)
attached to the lower left and right door hinges.
Remove the lower left and right door hinges (@).
10 Setting Up