MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
I
door is lower 8
than the right
door.
When the left
door is higher
than the right
door.
-- part
1. If you open the drawer ({_}), you can see the lower hinge (_}).
2. Insert the supplied hex wrench (_}) into the shaft (@) of the lower hinge.
3. Please adjust the height by turning the hex wrench (_}) clockwise ( ) or counter-clockwise ( ).
When you turn the hex wrench counter-clockwise( ), the door will move up.
.
After adjusting the doors, please insert the supplied fastener-ring ({_) using a pair of pliers ({_) in the
gap between the hinge-grommet (_}) and the lower hinge (_}). The number of fastener-rings you'll
need to insert depends on the gap.
@
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 0.04 inch.
16 Setting Up
To Next Page
Loading...
