ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part
_ Hu _
Freezer Drawer
f_
.
Locate the height-adjuster (1_)) in the freezer drawer.
Unscrew the four Phillips screws (I]_}) slightly to loosen the door.
2. Loosen the controller screw(G ) with a Phillips screwdriver.
3. Find the best level to align the door slope.
Example) The slope is about 2mm (0.08inch) as shown below.
SIope_______________________
Reference __
plane ._____ ,v
- Rotate the Height Adjuster to -2.0 to reduce the door slope.
After adjustment, first tighten screw((_) and then screw((_).
Setti_g Up 17
To Next Page
Loading...
