REATTACHING THE REFRIGERATOR DOORS
4. Connect the water line (_) and then insert a clip
on the coupler with pulling tube. Connect the one
connector (@) on left side door, the other connector
(_) on right side door and two connectors (_) at
each side of the top cap.
The clip is enveloped inside of the top cap.
Door Tube
Z_ The water line ((_) must be fully inserted to the marked line to prevent
....... water leakage from the dispenser.
.
Position the Top Table (_1) in place.
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened,
reinsert the Hinge Cover cap ([_) and close the doors.
_When reattaching the hinge cover, make sure that the
w_resare not pressed or damaged by the hinge cover.
%
Setti_g Up 13
To Next Page
Loading...
