Samsung Rocas 210 i - Film Rewinding Operations; Automatic Film Rewinding Process; Mid-Roll Film Rewinding Procedure

19
REWINDING THE FILM
1. Automatic rewinding
To rewind the film in the middle of a roll, press the mid-roll rewind button.
NOTE
If the motor stops before the LCD shows “0”, replace the battery. Do not open
the film chamber cover until the battery is replaced.
If you press the shutter button during the film rewinding, the rewinding is
interrupted until the shutter button is released.
After finish the rewinding, the film status symbol will mark as “ ”on the film.
2. Mid-roll rewinding
After taking all pictures on an IX film, the camera will automatically rewind the film. The motor stops when the
rewinding is completed.
When the rewind is complete, the “0”and the icon( ) will blink on the LCD panel.
Open the film chamber cover by moving the chamber open lever.
Take out the fully exposed film.(Film status symbol is “ ”)