Maintenance
English62
Maintenance
AutoFill Pitcher (applicable models only)
1. Grasp a handle groove of the lid, and
then pull up to remove.
2. Grasp both sides of the infuser holder,
and then lift to remove.
3. While slightly twisting the infuser, pull
it out of the sealed mouth.
4. Clean the infuser with neutral agents
and running water. Rinse and dry well.
5. Reassemble the AutoFill Pitcher in the
reverse order of disassembly.
CAUTION
The water pitcher and lid are not
microwave-safe and can melt or deform
if exposed to heat (including hot water).
Please hand wash in cool or warm water as
needed.
Untitled-3 62 2023-01-30 11:32:04
To Next Page
Loading...
