2. The Installation Space
Selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the refrigerator
doors to open easily.
• Allow sufficient space to install the refrigerator on a flat
surface.
• If your refrigerator is not level, the internal cooling system
may not work correctly.
• Refer to drawing and dimensions below for overall space
required for use.
•
FLOORING
For proper installation, you must place this refrigerator on a level, hard
surface that is the same height as the rest of the floor.
This surface should be strong enough to support a fully loaded refrigerator.
To protect the finish of the flooring, cut a large section of the cardboard
carton and place it under the refrigerator where you are working.
When moving the refrigerator, you need to pull and push it straight
forwards or back.
Do not wiggle it from side to side.
at least 2”
(50.8 mm)
at least 2” (50.8
mm)
(40 1/20")
(43 3/5")
135 ° 135 °
Dimensions [inch (mm)]
Model
RS25H50****
Width
Only Cabinet 908 (35 3/4)
With Leg Front 915.5 (36 1/20)
Depth
Only Cabinet 784 (30 9/10)
With Door 875 (34 29/64)
With Handle 940 (37)
90° Open F 1169 (46) / R 1295.5 (51)
135° Open
F 1017.5 (40 1/20) /
R 1107 (43 3/5)
Height
Only Cabinet 1740 (68 1/2)
With Hinge 1775 (69 7/8)
With Door 1775 (69 7/8)
To Next Page
Loading...
