Installation
English32
Installation
STEP 4 Adjust the levelling legs
Make sure the refrigerator is level so that you can make nal adjustments. Use a level
to test if the refrigerator is level both side to side and back to front. If the refrigerator is
not level, you will not be able to get the doors perfectly even, which may cause moisture
condensation and increased energy bills.
Before levelling the refrigerator, remove the front legs cover.
Open both the freezer and fridge doors.
Unscrew the three screws holding the
front legs cover in place by turning them
counter-clockwise. When the screws are
loose, remove the front legs cover.
When the freezer is lower than the fridge.
Insert a at-head screwdriver into a slot on the freezer leg, and then turn it clockwise.
When the fridge is lower than the freezer.
Insert a at-head screwdriver into a
slot on the fridge leg, and then turn it
clockwise.
Untitled-2 32 2018-12-27 11:31:23
To Next Page
Loading...
