English 33
Installation
STEP 5 Making minor adjustments between doors
A level refrigerator is necessary for getting the doors perfectly even. Make sure your
refrigerator is level before you begin. If you need help levelling, review the previous
section on levelling the refrigerator.
The process for adjusting each door is the
same. Open the doors and adjust them, one
at a time, as follows:
1. Unscrew the nut (A) from the lower
hinge until it reaches the upper end of
the bolt (B).
NOTE
When you release the nut (A), use the
provided hex wrench (C) to loosen the bolt
(B) in a counter-clockwise direction. You
should then be able to unscrew the nut
with your ngers.
2. Adjust the height difference between
the doors by turning the bolt clockwise
or counter clockwise.
NOTE
When you turn clockwise, the door will
move up.
Untitled-2 33 2018-12-27 11:31:24
To Next Page
Loading...
