English 35
Installation
5. Remove the upper hinges (C) on both
sides.
6. Gently lift up the doors one by one to
remove. Use caution as the door may
fall off or over.
Reconnect the water hoses (applicable models only)
Once the refrigerator has passed through the entrance, reconnect the water hoses and
insert the provided clips (x2) to tighten the coupler.
A. Center of transparent coupler
B. Clip A (1/4”) (6.35 mm)
CAUTION
• Make sure the water hoses are
connected with matching colours.
• To prevent water leaks, each water
hose must be inserted fully to the
centre of the transparent coupler and
then must be clipped.
Untitled-12 35 2017-07-14 12:44:41
To Next Page
Loading...
Need help?
General
