Samsung RS58K series - Door Height and Gap Adjustment

Installation
English30
Installation
STEP 4 Adjust the door height as well as the door gap
To adjust the height of a door
The height of a door can be adjusted using the clamp nut and the height nut on the front
bottom of each door.
B
A
1. Open the door to adjust, and locate the
two nuts (A) and (B) on the front bottom
of the door.
A
2. With the provided spanner, turn the
clamp nut (A) clockwise to loosen. Then,
open the door, and do the following
inside the door.
- To raise the door, turn the height nut
(B) counter clockwise.
- To lower the door, turn the height
nut (B) clockwise.
A
3. When complete, tighten the clamp nut
(A) by turning it counter clockwise.
Untitled-11 30 2016-02-15  4:32:35