NO HOW TO DO PICTURES
1
- Check if the floor is leveled.
If the floor is not leveled, it causes vibration and noise,
and when opening/closing the doors, the refrigerator
could be tipped over resulting in personal injuries.
2
- give enough gaps between the unit and the walls
- For dispenser models, select a place easy to access the
water supply with little humidity.
- Keep it away from places with direct sun light, much heat
or too low temp.
A place with a surrounding temp ranging from
41℉ to 109.4℉ is recommended.
A place with too high/low temps causes problem
and affects cooling power.
3. How to install
3-3. Selecting a good place
To do list
To Next Page
Loading...
