21
Part name Work sequence Remarks
Door
1. Disconnect the power cord, and
remove 1 cover screws using a
Phillips screw driver.
Then pull the hooks on the sides to
loosen the cover. Lift up the cover
towards you to detach it.
2. Disassemble two connectors of the
housing.
3. Disasemble the three fastening
screws on the top hinge of the show
case. Remove the door from the lower
hinge by lifting up straightly.
4. Disassemble the show case door.
(Cover Hinge Type –
Show case of Fridge Door)
3-6. Assembly Hinge-Up Disassembling
3. How to install
To Next Page
Loading...
