Maintenance
English52
Maintenance
STEP 5 Reattach the doors on the opposite side
1. Use a at-heat screwdriver to remove
the middle-hinge screw cap, and then
reinsert it on the opposite side.
2. Use the at-heat screwdriver to remove
the ange-screw cap to reveal the
ange screw. Use a Phillips screwdriver
to remove the ange screw, and then
tighten it on the opposite side. Finally,
close the ange-screw cap on the
opposite side.
3. Remove the grommet ring from the
middle-hinge shaft, and then reinsert
the ring on the other side of the shaft.
See the gure for visual reference.
Untitled-12 52 2018-06-04 11:50:21
To Next Page
Loading...
