Installation
English30
Installation
CAUTION
Before moving the refrigerator, make sure
to turn the levelling feet counter clockwise
so that the bottom of the refrigerator at
least 66 mm from the oor.
STEP 5 Attach the door support (glass door models only)
To prevent the refrigerator from falling or
shaking while it is operating or when the
door bin is fully loaded but the fridge is
empty, follow these instructions to attach
the door support (A). This work must be
done by two persons.
1. Tilt the refrigerator backward, and have
one person hold the refrigerator from
the back.
2. The other person inserts the door
support (A) into the bottom hole of the
door.
3. Use a Phillips screwdriver to tighten the
screw.
CAUTION
To avoid personal injury or product
damage from a fall or scratch, use caution
throughout the entire process.
Untitled-8 30 2018-07-16 4:31:20
To Next Page
Loading...
