Samsung Electronics
15
• S-BOX Connection (Panel Configuration)
1. S-BOX Installation and Connection
① S-Box Picture Setting according to model
• The LED display model to be installed and the optimized image quality setting are automatically set after LSM connection is set.
• For the best picture quality, make sure to connect/register S-Box and LED display with LSM SW.
• The LED Display must be connected to OCM.
• The Picture configuration will be set base on the model of the 1
st
Master LED display which is connected to DATA OUT in S-Box.
* LSM connection is required for LED specialized function use and cabinet control.
< Connected condition in LSM >
Control PC
(LSM)
S-box
Ethernet
Vx1
……………
Video + control signal
Cabinet 1
(Master)
Cabinet N
To Next Page
Loading...
