Need help?Do you have a question about the Samsung S-Box and is the answer not in the manual?
Details essential precautions for the safe and proper installation of the S-BOX.
Visual guide showing the front and rear views of the SNOW-RAF S-BOX and its ports.
Instructions on how to connect the S-BOX to LED cabinets using OCM cables.
Steps for establishing a redundant connection setup for the S-BOX.
Guide for connecting an external IR receiver to the S-BOX for remote control.
Instructions for connecting an external ambient light sensor to the S-BOX if needed.
How to connect the S-BOX via RS232C for network settings or debugging.
Utilising the Network IP Setting Tool for configuring the S-BOX's IP address.
Configuring LED display panels via the LSM software for optimal performance.
Steps to set the correct display resolution on the connected PC for the LED display.
Information on using the S-BOX service port for monitoring and initial setup procedures.
Overview of the control program for managing LED signage from a PC.
Detailed guide to the LED Signage Manager (LSM) software for controlling LED cabinets.
Initial login process and password configuration for the LSM software.
Procedures for creating new connections to S-BOX and LED cabinets within LSM.
Steps to connect S-BOX and specify IP addresses for LED cabinets in LSM.
Navigating and understanding the LSM home screen for device status.
Adjusting the position and layout of individual LED cabinets using LSM.
Managing device connections, layouts, and various settings through the LSM Connection Window.
Accessing and configuring device information, picture, and system settings in LSM.
Configuring cabinet settings and performing calibration using LSM.
Accessing monitor logs, cabinet, and box information within LSM.
Customizing LSM preferences for logs, alerts, and software updates.
Troubleshooting common network connection problems between the S-BOX and the LSM software.
Essential precautions for the secure and proper wall mounting of the S-BOX.
To Next Page
General