Samsung Electronics
17
① The service port is dedicated port for monitoring to check the usage of OSD and the source being
played at the initial installation of the S-BOX.
② Service port has FHD (1920*1080 @60Hz) resolution.
③ Service port can’t be used for regular video transmission.
④ Depending on the HDCP presence/ absence of the input content, the output of the service port
screen is limited.
When entering HDCP contents, the blue pattern is displayed as shown below.
1. S-BOX Installation and Connection
• S-BOX Connection (Service port)
LED Screen
Service port
< Non-HDCP contents >
LED Screen
Service port
< HDCP contents >
To Next Page
Loading...
