Samsung Electronics
2-1. Control Program for PCs
• New Connection-Connect
4. Connection information of S-Box is generated in Setup
and Connect. You can select the S-Box type to use by
selecting the Model Type.
5. Model Type is provided with a total of 4. (Without
Cabinet IP / With Cabinet IP (FHD) / With Cabinet IP
(UHD) / The Wall Luxury)
After selecting according to the S-BOX product you use,
you must specify the IP address of the LED cabinets
connected to each port.
After setting the number of connections, click the
‘Connect’ button.
※ If you install it for the first time, check the "Assign Details and
Acceptance" option. In this case, you automatically assign the ID of the
LED cabinets on that port and then arbitrarily set the location information.
The location information of the LED cabinets can then be modified.
※ If you have already set an IP in the cabinet, check the “ Connect with
connected addresses ” option.
※ For UHD, if you want to use only some of the four ports, you only
need to enter an IP address for the group.
LSM(LED Signage Manager)
2. Settings and How to Use
To Next Page
Loading...
