Samsung Electronics
① Check the installable wall and install it using screws that fit the wall material. (Satisfied with more than 3kg of load)
② Install the Service Port upward as shown below.
③ Make sure that there is a space of at least 50mm between the wall and the four sides of the device. In the case of
cable ports, a space of more than 50mm is maintained for easy cable connection.
④ Do not install in locations where there is a risk of vibration or shock, next to a sprinkler sensor, near high-pressure
cables, near heaters.
⑤ If the product needs to be fastened such as bracket, use the following holes. (M4, Depth 5mm)
31
[Appendix] S-BOX Wall Installation
• S-BOX Wall Installation Precautions
↑UP
Product fastenable Hole
(M4, Depth 5mm)
To Previous Page
Loading...
