Samsung S136DL - Date and time; Troubleshooting

Date and time
By default, your device receives date and time information from the wireless
network. Outside of network coverage, you can set the date and time manually.
◌
From Settings, tap General management > Date and time. Thefollowing
options are available:
•
Automatic date and time: Receive date and time updates from your wireless
network. When Automatic date and time is disabled, the following options
are available:
– Select time zone: Choose a new time zone.
– Set date: Enter the current date.
– Set time: Enter the current time.
•
Use 24-hour format: Set the format for displaying time.
Troubleshooting
You can check for software updates and, if necessary, reset services on your device.
Software update/System updates
Check for and install available software updates for your device. Options may vary
by carrier.
◌
From Settings, tap Software update/System updates for the following options:
•
Check for updates: Manually check for software updates.
•
Continue update: Resume an update that was interrupted.
129
Settings